These days, it is all about smart electronic devices. Then why should a lock be spared? Locks are one of the most integral parts of home security. In most cases, only a lock stands between the safety of the property and the burglar or intruder is only a lock. Thereby, people do most in their power to ensure they have the best lock to protect their property. This is partly the reason why they opt for a smart lock. But there are other reasons too, such as better protection against intruders, not being easy to tamper with, and people don’t have to keep a key on them all the time. But like any other item in the world, at times even your electronic lock may show signs of irregularities and errors. To rectify it, it is best to contact a locksmith for electronic door lock repair in Dublin. But what are the problems that can stop an electronic lock? Let’s see:

Jammed Smart Lock:

Like any other ordinary locks, even your electronic smart locks are susceptible to jam. When this happens it prevents the movement of the deadbolt. The constriction in movement doesn’t allow the lock to open. While a novice can fiddle with a normal lock to fix the jammed deadbolt, the same can’t be applied to an electronic smart lock. This is why it is important to contact a locksmith in Dublin who is versed in electronic locks to repairing the door lock.

Faulty Deadbolt:

When you have a faulty deadbolt, then even after you have pressed the right security pin, it will not budge. If in such a situation you try to act forcefully with the lock, it can cause more problems than any good. Thus, if you are suspecting a fault in the deadbolt then it is best to contact a locksmith who can replace and repair the deadbolt of the door lock in Dublin.

Weather Condition:

Unlike other analogue locks, the electronic smart lock is not well-versed in extreme weather conditions. When the lock is exposed to extreme weather conditions such as extreme cold, this can cause the lock’s acurator not to work accurately. Long-term use or cold weather may prevent the actuator from moving the other parts sufficiently to lock or unlock the bolt. To fix this problem of electronic smart locks, you will require help from an experienced locksmith.

These are some of the common problems that affect your electronic door lock from functioning as intended. To resolve the such issue it is best to contact an expert locksmith instead of taking matters into your own hands.



Door locks are your first line of defence against any external danger. You have to take active measures to ensure your house is optimally secure. Having a loose door will render your home security breachable and insecure against outside threats. Thus it is very important to ensure your door lock remains in proper working condition at all times. But with regular usage, the lock of your dock is bound to exhibit certain issues. One such issue is the loose door lock. A loose lock will not provide you with the requisite amount of security that you may need to feel secure in your home. This is why it is important to get your lock in efficient working condition. One way to keep your lock in proper working condition is by getting your door locks checked by one of the best locksmiths in Dublin.

A locksmith in Dublin will implement certain steps to ensure your door lock remains in proper working condition at all times. There are four steps that a locksmith will utilize to ensure your door lock is not loose and in proper working condition at all times. These steps are:

Fix The Screws

In a door lock, there can be either exposed or hidden screws, to tighten the lock the locksmith will first work on these screws. For exposed screws, with the help of a screwdriver, the locksmith will unscrew the door lock. Once the exposed screws are unscrewed, it will leave the shaft exposed. If the shaft is threaded, you’ll need to twist the handle to make it flush with the door. Allow enough room for the knob to spin freely by backing it up slightly. After that, tighten the set screw. Before tightening the set screw on an unthreaded shaft, place the knob or handle back on the shaft and up to the door face. To see the hidden screws, you must first locate the detent access hole when looking at the knob. The detent is a spring-activated pin that sticks out of the knob’s small hole, preventing it from rotating. When you’ve found the pin, use a flathead screwdriver to press down on it and remove the handle from the spindle shaft.

Take out the base

Remove the base after the locksmith in Dublin has separated the doorknob from the spindle shaft. With a flathead screwdriver, slowly pull the ring loose, being careful not to damage the backing plate, which could damage the entire lockset.

Locate and tighten the screws

A locksmith in Dublin should be able to discern the set of screws after successfully stripping away the ring. They run from the inside to the outside backing plate of the door, holding the entire assembly together. They will tighten each screw individually while holding the outside backing plate in place.

Assemble the pieces back

Replace the backing plate’s ring. A locksmith in Dublin can now replace the spindle shaft handle. Turn the handle to align the holes with the detent and click into place once the spindle shaft is fully inserted.

Following these steps, a locksmith in Dublin can easily fix your loose door lock. When the door lock is rightly tightened up, it will offer you an optimal amount of security. And then, you can sleep peacefully at night knowing the physical security of your home remains up.

All this is because of a problematic lock that is stopping you from entering or not letting you exist in a certain area. Then what to do? Either you can try to solve the problem at hand by yourself. Or you can for help from a qualified locksmith. Fortunately, in Dublin there are 24-hour locksmith services available. Thereby, you can get help to unlock any jammed door of your home or car at any time of the day. Let’s take a look at the top reason why you should hire a professional locksmith

When you search for a 24/7 licensed locksmith in the Dublin area, try to look for a professional who has a proper license. To obtain proper licensing for any professional in any profession, one must have certain qualifications. Thus, they are technically sound and better trained in providing an array of services.

Availability 24/7:
You never know when an emergency knocks on the door. Thus, knowing 24/7 locksmith service comes to aid in the face of an emergency. Suppose, you have returned home late from work to know that you’ve lost your key. Now what? Are you ready to stand outside in the chilling cold of Dublin? In such a situation a 24/7 locksmith service comes very handily.

Profession Help Even For Minor Problems:
Minor harm is likely when you need a professional locksmith to address defective locks. The replacement and repair of the lock might result in a shattered door, glass, and even a broken lock.

But don’t worry, these experienced locksmiths will cover any damage that occurs as a result of their labour.

Emergency Services:
It is essential to contact a qualified locksmith not only because they can assist in dealing with the problem professionally, but also because they ensure that they satisfy professional requirements. During an emergency, you need a professional who can address difficulties quickly. They provide services on schedule while ensuring that safety remains intact.

When you have a contact of 24 hours, licensed and reliable locksmith in Dublin’s number saved in your phone you can rest assured. No matter what time of the day it is, a reliable locksmith will be there to save you. When you have a reliable relationship with a locksmith you can use their help with locks of sensitive areas too without fear.

In the end, remember not all locksmiths are the same. In terms of expertise, qualification or reliability, they vary. Thus, having several 24/7 locksmiths in an area like Dublin is an absolute necessity for you. It may not deem necessary until you are stuck in an emergency.